Seasense Solid State Sensing Bilge Switch

Make the Smart Switch with the NEW SeaSense Solid-State Sensing Bilge Switch with LED Ever wondered whether or not your bilge system was working properly? Have you ever flipped the switch for your bilge pump knowing there was water in the bilge, but nothing came out? We all know how frustrating that can be. Now, with our new SeaSense Solid-State Bilge Switch, you can know at a glance if your bilge system is functioning properly. If the green LED is illuminated, the switch is in stand-by mode. If both the LEDs are illuminated, the bilge pump should be active. If not, it is a clear indication that further troubleshooting is required. The SeaSense Solid-State Sensing Bilge Switch is designed to eliminate the problems associated with old-style float switches. Our switch has sensors that activate automatically when water reaches the installed height of switch in the bilge. It conserves energy by running only when water activates the pump. Similar units use an intermittent pulse that can run down your battery. When the water reaches the preset level, the switch senses it and turns on the attached bilge pump (not included). When the water level drops, the switch turns the pump off. It's that simple We designed our switch to be mounted in small spaces.

• LED Lights Let You Know When the Pump/Switch are Active
• All Solid State/No Moving Parts/Does Not Pulse/Smallest Bilge Switch
• Completely Waterproof Unit, Multiple Mounting Positions
• Save Battery Power Consumes only .05 mA in stand-by